AC100-PRO® VINYLESTER 420ML
DFC100A
AC100-PRO® VINYLESTER 420ML
- 18 months shelf life*
- Low odour level (Low VOC)
- Curing time: 45 minutes at 20°C
Product Overview
The AC100-PRO® is a two-component 10:1 ratio styrene-free vinylester adhesive anchoring system especially designed for anchoring of threaded rod, reinforcing bar or internal threaded rod sleeves into concrete and masonry base materials.͍This fast curing formulation is recommended for use in concrete and masonry. Unlike other systems on the market, one formulation is used for both solid and hollow base material applications (when used in combination with sleeves), reducing the chance of job site installation errors. The fast curing characteristics of this versatile anchoring system make it ideal for use in a broad range of applications.
Additional Features
- Approved for hollow brick (M8-M12)
- Styrene free, styrol free and odourless
- Installation down to -10°C
- *from date of manufacture
Applications
- Heavy steel connections, handrails, safety barriers, starter bars, base plates, bridges
Specifications
|
No Load Speed (RPM)
|
0-1500
|
|
Number of Pieces
|
1
|
Support
Warranty
- No Limited Warranty
Unfortunately, this specific product is not eligible for any warranty. Whilst this product is not eligible, further information about our warranties can be located below.
Service
We take extensive measures to ensure all our products are made to the very highest standards and meet all relevant industry regulations.
